Ask Danny | Ep. 16: Top 5 Simple Solutions for Bathroom Maintenance
This 7 days, Today’s Homeowner Radio Demonstrate co-host Joe Truini presents his Prime 5 Simple Options for the rest room.
Drinking water Place Remover for Shower Doorways
Does your glass shower doorway have h2o spots? They’re a ache to clear away, and common cleaners just just can’t do the position. Effectively, here’s a top secret drinking water place remover that you may by now have without the need of noticing it!
Nobody wishes to wipe their shower door each individual time immediately after they use it to reduce h2o spots. And let’s be sincere — who has the time for that?
Which is why it will help to have the proper resource for normal servicing.
I like to use a glass cleaner with a system that is made up of rain repellant — like this just one. (This is an affiliate connection. If you obtain this product or service, we will receive a tiny fee at no added value to you.)
This type of products is generally advertised for cleaning bugs and getting rid of h2o spots from motor vehicle or truck windshields, but that doesn’t necessarily mean it only is effective on these surfaces! So seem in the automotive aisle if you just cannot uncover the product around normal cleaners.
Now, why does this merchandise get the job done about typical domestic cleaners?
It is since the rain-repellant components will cause drinking water to bead up and repel off the shower door. That suggests your glass shower enclosure will have no drinking water places!
Here’s how it will work: Just spray the cleaner on the glass and use a towel to wipe it off — I usually use a cotton microfiber towel.
Now you have an effortless drinking water place remover! Not only is the glass clean up, but it also repels water with no recognizing.
Observe: Effortless Water Spot Remover for Your Shower Doorway
How to Clean up and Deodorize Bathtub Sink
It is not generally you provide baking soda and vinegar into a toilet, but you can use them to cleanse and deodorize a lavatory sink.
Sinks frequently grow to be slow-draining, and they can get clogged up with cleaning soap scum and hair. They will also deliver a rather funky odor, so here’s how to get rid of that.
Commence with just one-3rd cup of baking soda. You really do not have to be much too specific, but you will will need to consider about a third of a cup or so and dump it in the drain.
Future, consider just one comprehensive cup of vinegar. White vinegar is a genuinely powerful cleansing agent that you can use all around the residence.
Soon after it hits the baking soda, permit it fizz down for a number of minutes. Some people today could use bleach below, but bleach can truly consume the end appropriate off of some bathtub fixtures, so you never want to use it.
Following the baking soda and vinegar have calmed down a little little bit, comply with up with a comprehensive kettle of warm h2o. This will, in blend with the vinegar and the baking soda, reduce as a result of anything at all that could possibly be clogging up the sink.
If you do this procedure at the time a thirty day period, you will have a truly sweet-smelling sink and a cost-free-flowing drain.
Enjoy: The Effortless Way to Thoroughly clean and Deodorize Your Sink
How to Change a Rest room Flapper Valve
If you have a rest room that’s frequently running, the culprit is probable a leaky flapper valve. Around time, flapper valves may well become cracked or warped, which can permit h2o to leak out.
Here’s how to exchange it:
- Change the h2o off to your toilet.
- Flush the drinking water out so the tank is empty
- Unhook the previous flapper valve and snap on the new a person.
- Modify the chain to make absolutely sure the duration is appropriate.
- Convert the drinking water back again on and flush the bathroom a couple of situations to make positive the flapper valve is doing the job correctly.
View: How to Change Toilet Flapper Valve
How to Electrical power-Clear Bathtub Tiles
Scrub brushes function very well for cleaning, but they call for a ton of elbow grease. To convert a typical hand scrub brush into a energy attachment for your drill:
- Cut the handle off a spherical scrub brush.
- Drill a gap in the center of the brush.
- Insert a 4-inch long machine bolt in the hole from the bristle aspect.
- Put a washer and nut on the again side and tighten it up.
- Chuck the bolt into a drill.
- Run the drill at medium velocity when making use of the scrub brush attachment.
Observe: How to Clean Tiles Quicker Than At any time
How to Thoroughly clean a Clogged Showerhead
Showerhead spray nozzles can turn out to be clogged above time with mineral deposits observed in faucet water.
To cleanse a showerhead so it sprays uniformly:
- Area a plastic bag filled with white distilled vinegar above the showerhead.
- Connect a twist tie around the showerhead arm to maintain the bag in location.
- Permit the showerhead to soak in the vinegar for one to two days.
- Get rid of the bag and convert the showerhead on whole drive.
If the nozzles are nevertheless clogged, repeat the soaking course of action right until distinct.
View: How to Thoroughly clean a Clogged Showerhead
